Linux 下 lacp bond 模式的疑问

Transmit Hash Policy 无论是 layer2 layer2+3 layer3+4 流量只走端口 1 ，如果有另一台设备连接才会走端口 2
我想问一下是哪里配置错了吗？

Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)

Bonding Mode: IEEE 802.3ad Dynamic link aggregation
Transmit Hash Policy: layer2+3 (2)
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 0
Down Delay (ms): 0

802.3ad info
LACP rate: fast
Min links: 0
Aggregator selection policy (ad_select): stable
System priority: 65535
System MAC address: 1c:98:ec:0e:11:08
Active Aggregator Info:
Aggregator ID: 1
Number of ports: 2
Actor Key: 9
Partner Key: 77
Partner Mac Address: 80:c1:6e:d0:b4:f0

Slave Interface: eno1
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 1
Permanent HW addr: 1c:98:ec:0e:11:08
Slave queue ID: 0
Aggregator ID: 1
Actor Churn State: none
Partner Churn State: none
Actor Churned Count: 0
Partner Churned Count: 0
details actor lacp pdu:
system priority: 65535
system mac address: 1c:98:ec:0e:11:08
port key: 9
port priority: 255
port number: 1
port state: 63
details partner lacp pdu:
system priority: 46320
system mac address: 80:c1:6e:d0:b4:f0
oper key: 77
port priority: 0
port number: 1
port state: 61

Slave Interface: eno2
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 1
Permanent HW addr: 1c:98:ec:0e:11:09
Slave queue ID: 0
Aggregator ID: 1
Actor Churn State: none
Partner Churn State: none
Actor Churned Count: 0
Partner Churned Count: 0
details actor lacp pdu:
system priority: 65535
system mac address: 1c:98:ec:0e:11:08
port key: 9
port priority: 255
port number: 2
port state: 63
details partner lacp pdu:
system priority: 46320
system mac address: 80:c1:6e:d0:b4:f0
oper key: 77
port priority: 0
port number: 2
port state: 61